Clip-on nozzles · Flat fan
Flat Fan Clip-On Plastic Spray Nozzles
A sharp-edged, even flat fan that sweeps the full width of the part. Clamp-on mounting means a new spray header can be built in an afternoon.
- Uniform flat-fan coverage with clean edges
- 0.3–4 bar low-pressure operation
- Glass-filled PP body, SS 304/316 clamp
Flat fanOverview
Built for pretreatment and washing lines
Flat fan nozzles deliver a thin, wedge-shaped sheet of liquid. Mounted in a row with a small overlap, they give even coverage across a conveyor or panel. That is why they are the standard choice for degreasing, phosphating and rinse stages in paint shops.
Our flat fan version uses the same clip-on mounting as our other pipe clamp nozzles, so you can mix patterns on one header when a part needs both direct impact and wrap-around coverage.
Typical applications
- Parts cleaning
- Degreasing
- Phosphating
- Rinsing
- Surface treatment before painting
- Conveyor and belt washing
Benefits
Why choose our flat fan clip-on spray nozzles
Even coverage
Flat fan with tapered edges overlaps cleanly between nozzles.
Clamp-on mounting
No threading or welding on the spray header.
Adjustable angle
Ball joint lets you set each fan to the part.
Chemical resistant
PP body suits degreasing and phosphating chemistry.
Easy cleaning
Remove, clean and refit in minutes.
Long life
Glass-fibre reinforcement improves wear resistance.
Specifications
Technical details
| Product | Low-pressure plastic water spray clip-on pipe clamping nozzle |
|---|---|
| Body material | Polypropylene (PP) with long glass fibre |
| Clamp material | Stainless steel 304 or 316 (food grade) |
| Working pressure | 0.3 – 4 bar |
| Clamp size | 3/4″ – 2″ (pipe outer diameter 27 – 60 mm) |
| Spray pattern | Flat fan |
| Spray angle | 40° – 80° |
Need a size or connection not listed? We make all types and sizes to order.
How to order
What we need for a quote
- Product and spray pattern
- Pipe size or thread connection
- Operating pressure
- Flow per nozzle or total flow
- Liquid and temperature
- Quantity and delivery city
FAQs
Flat Fan Clip-On Spray Nozzles: frequently asked questions
What is a flat fan spray nozzle?
It produces a flat, fan-shaped sheet of spray. The edges are tapered so neighbouring nozzles on a header can overlap and give uniform coverage.
How far apart should flat fan nozzles be?
Spacing depends on spray angle and the distance to the part. As a rule, set spacing so adjacent fans overlap by about a quarter to a third of their width. Send us the header height and part width and we will calculate it.
Can I use flat fan nozzles in a phosphating line?
Yes. Phosphating and degreasing are among the most common uses. Share the chemical and temperature so we can confirm the material.
Should I tilt flat fan nozzles?
Tilting each fan by 5–15° along the header stops neighbouring sprays colliding and improves coverage. The ball joint makes this easy.
Do you also supply full cone clip-on nozzles?
Yes. See our clip-on spray nozzles, which come in full cone, hollow cone and flat fan.
Related products
You may also need
Not sure which nozzle fits your line?
Tell us the liquid, pressure and coverage you need. A nozzle engineer will recommend the right type, size and material.


