Products
Plastic Spray Nozzles: The Complete Range
Nine nozzle families moulded in chemical-resistant plastic. Choose by application below, or ask us and we will recommend the right one.
Industrial nozzles
For process, washing and cleaning lines
PP Spiral NozzleClog-resistant open-passage nozzles for scrubbers, cooling and gas washing.View details 
Clip-On Spray NozzleClamp straight onto 3/4″–2″ pipe. Full cone, hollow cone or flat fan.View details 
Flat Fan Clip-On NozzleEven flat-fan coverage for washing, degreasing and pretreatment lines.View details 
Ball-Joint Full Cone NozzleSwivel ball lets you aim the spray exactly where it is needed.View details 
Air Jet NozzleFocused compressed-air blow-off for drying, cooling and cleaning.View details 
Plastic Tank EductorKeep tank contents moving and mixed with no moving parts.View details Agricultural nozzles
For crop sprayers, booms and drones
Materials
Choose the right plastic
Material decides how long a nozzle lasts in your liquid.
| Material | Typical max. temperature* | Chemical resistance | Best for |
|---|---|---|---|
| Polypropylene (PP) | about 80°C | Most acids, alkalis and salts | General chemical, scrubbers, agriculture |
| PVDF | about 120°C | Very broad, incl. oxidisers and many solvents | Hot or aggressive chemicals |
| PVC | about 50–60°C | Good for water, many acids and alkalis | Low-cost cold water duties |
| Nylon (PA) | about 80°C | Good for oils and many solvents; weak with acids | Agricultural and wear-resistant parts |
| Acetal (POM, “Delrin”) | about 80°C | Good for neutral liquids and fuels; weak with strong acids | Precision, high-strength parts |
*Typical guide values. The safe limit depends on pressure, concentration and duty. Always share your chemical and temperature so we can confirm the material.
FAQs
Frequently asked questions
How do I choose between your nozzle types?
Start with the job: washing and rinsing usually need flat fan nozzles, cooling and scrubbing need full cone or spiral nozzles, and crop protection needs hollow cone or flat fan tips. Our nozzle finder or engineers can confirm.
Can I order a sample before a bulk order?
Yes. Ask for a sample with your enquiry and we will confirm availability.
What details should I include in a quote request?
Product type, pipe size or thread, operating pressure, flow per nozzle, the liquid and its temperature, quantity and delivery location.
Do your nozzles come in metal too?
This site covers our plastic range. If your duty needs metal nozzles, tell us and we will advise.
Not sure which nozzle fits your line?
Tell us the liquid, pressure and coverage you need. A nozzle engineer will recommend the right type, size and material.