Skip to content
Plastic spray nozzle manufacturer · Supplying across India
Plastic Spray Nozzle logoPlastic Spray NozzlePP · PVDF · PVC spray nozzles

Clip-on nozzles · Flat fan

Flat Fan Clip-On Plastic Spray Nozzles

A sharp-edged, even flat fan that sweeps the full width of the part. Clamp-on mounting means a new spray header can be built in an afternoon.

  • Uniform flat-fan coverage with clean edges
  • 0.3–4 bar low-pressure operation
  • Glass-filled PP body, SS 304/316 clamp
Flat Fan Clip-On Plastic Spray NozzlesFlat fan

Overview

Built for pretreatment and washing lines

Flat fan nozzles deliver a thin, wedge-shaped sheet of liquid. Mounted in a row with a small overlap, they give even coverage across a conveyor or panel. That is why they are the standard choice for degreasing, phosphating and rinse stages in paint shops.

Our flat fan version uses the same clip-on mounting as our other pipe clamp nozzles, so you can mix patterns on one header when a part needs both direct impact and wrap-around coverage.

Typical applications

  • Parts cleaning
  • Degreasing
  • Phosphating
  • Rinsing
  • Surface treatment before painting
  • Conveyor and belt washing

Benefits

Why choose our flat fan clip-on spray nozzles

Even coverage

Flat fan with tapered edges overlaps cleanly between nozzles.

Clamp-on mounting

No threading or welding on the spray header.

Adjustable angle

Ball joint lets you set each fan to the part.

Chemical resistant

PP body suits degreasing and phosphating chemistry.

Easy cleaning

Remove, clean and refit in minutes.

Long life

Glass-fibre reinforcement improves wear resistance.

Specifications

Technical details

Product Low-pressure plastic water spray clip-on pipe clamping nozzle
Body material Polypropylene (PP) with long glass fibre
Clamp material Stainless steel 304 or 316 (food grade)
Working pressure 0.3 – 4 bar
Clamp size 3/4″ – 2″ (pipe outer diameter 27 – 60 mm)
Spray pattern Flat fan
Spray angle 40° – 80°

Need a size or connection not listed? We make all types and sizes to order.

How to order

What we need for a quote

  • Product and spray pattern
  • Pipe size or thread connection
  • Operating pressure
  • Flow per nozzle or total flow
  • Liquid and temperature
  • Quantity and delivery city

Send your requirement

FAQs

Flat Fan Clip-On Spray Nozzles: frequently asked questions

What is a flat fan spray nozzle?

It produces a flat, fan-shaped sheet of spray. The edges are tapered so neighbouring nozzles on a header can overlap and give uniform coverage.

How far apart should flat fan nozzles be?

Spacing depends on spray angle and the distance to the part. As a rule, set spacing so adjacent fans overlap by about a quarter to a third of their width. Send us the header height and part width and we will calculate it.

Can I use flat fan nozzles in a phosphating line?

Yes. Phosphating and degreasing are among the most common uses. Share the chemical and temperature so we can confirm the material.

Should I tilt flat fan nozzles?

Tilting each fan by 5–15° along the header stops neighbouring sprays colliding and improves coverage. The ball joint makes this easy.

Do you also supply full cone clip-on nozzles?

Yes. See our clip-on spray nozzles, which come in full cone, hollow cone and flat fan.

Not sure which nozzle fits your line?

Tell us the liquid, pressure and coverage you need. A nozzle engineer will recommend the right type, size and material.