Skip to content
Plastic spray nozzle manufacturer · Supplying across India
Plastic Spray Nozzle logoPlastic Spray NozzlePP · PVDF · PVC spray nozzles

Clip-on nozzles · Pipe clamp

Clip-On Pipe Clamp Spray Nozzles

Snap a nozzle onto the spray header, drill one hole and you are spraying. No threading, no welding and no extra fittings. Ideal for washing, pretreatment and rinse tunnels.

  • Fits 3/4″ to 2″ pipe (27–60 mm OD)
  • Stainless steel 304 or 316 clamp
  • Adjustable ball joint to aim each spray
Clip-On Pipe Clamp Spray NozzlesPipe clamp

Overview

Fast to fit, easy to aim

Clip-on nozzles clamp directly around the pipe. A sealed saddle sits over a drilled hole, and the stainless steel clamp holds it in place. Because each nozzle has an adjustable ball joint, you can angle the spray to hit every face of the part on a conveyor.

The body is made from polypropylene reinforced with long glass fibre, which improves wear, heat and corrosion resistance. Nozzles can be added, moved or replaced in minutes during maintenance.

Typical applications

  • Automotive coating and paint pretreatment
  • Water-leak (rain) test booths
  • Parts washing tunnels
  • Degreasing and phosphating
  • Rinsing and surface treatment
  • Bottle and crate washing

Benefits

Why choose our clip-on spray nozzles

No fittings needed

Clamps straight onto the header pipe over a drilled hole.

Aim every jet

Ball joint lets you point the spray at the part.

Durable materials

Glass-filled PP body with a food-grade SS 304/316 clamp.

Three spray patterns

Full cone, hollow cone or flat fan to suit the job.

Quick maintenance

Swap or clean a nozzle without taking the header apart.

Low running cost

Works at low pressure, saving pump energy.

Specifications

Technical details

Product Low-pressure plastic water spray clip-on pipe clamping nozzle
Body material Polypropylene (PP) with long glass fibre
Clamp material Stainless steel 304 or 316 (food grade)
Working pressure 0.3 – 4 bar
Clamp size 3/4″ – 2″ (pipe outer diameter 27 – 60 mm)
Spray pattern Flat fan, full cone or hollow cone
Spray angle 40° – 80°

Need a size or connection not listed? We make all types and sizes to order.

How to order

What we need for a quote

  • Product and spray pattern
  • Pipe size or thread connection
  • Operating pressure
  • Flow per nozzle or total flow
  • Liquid and temperature
  • Quantity and delivery city

Send your requirement

FAQs

Clip-On Spray Nozzles: frequently asked questions

What is a clip-on spray nozzle?

It is a nozzle with a built-in clamp that fits around a pipe. You drill a hole in the pipe, place the nozzle's saddle over it and tighten the clamp. No threaded fittings are needed.

Which pipe sizes do your clip-on nozzles fit?

Clamps are available for 3/4″ to 2″ pipe, which is an outer diameter of about 27 to 60 mm. Tell us your pipe OD and we will send the matching clamp.

What pressure do clip-on nozzles work at?

They are designed for low-pressure systems from 0.3 to 4 bar, which is typical for washing and pretreatment lines.

Can I change the spray direction?

Yes. The nozzle sits on an adjustable ball joint so each jet can be angled towards the part.

Is the clamp suitable for food or pharma lines?

The clamps are made of food-grade SS 304 or SS 316. Confirm the body material against your process liquid before use.

Where are clip-on nozzles used most?

Our biggest demand is from automobile manufacturing: paint pretreatment, coating lines and rain test booths. They are also common in parts washers and general industrial rinsing.

Not sure which nozzle fits your line?

Tell us the liquid, pressure and coverage you need. A nozzle engineer will recommend the right type, size and material.