Agriculture · Boom spraying
Boom Sprayer Nozzle Tips
A boom sprayer is only as even as its nozzles. Matched plastic tips give consistent overlap from one end of the boom to the other, so every row gets the same dose.
- Uniform overlap across the boom
- Tractor-mounted and towed booms
- Low-cost replacement tips
Boom sprayingOverview
What a boom sprayer needs from its nozzles
A boom sprayer carries a row of nozzles on a horizontal arm to treat a wide strip in one pass. Booms range from small towed units for estates to large tractor-mounted booms for field crops. They are also used to spray water on haul roads and yards to keep dust down.
For an even result every nozzle on the boom must deliver the same flow and pattern. Mixing worn and new tips, or different sizes, causes stripes of over- and under-dosing. Replace tips as a set and check boom height so the fans overlap correctly.
Typical applications
- Field crops
- Estates and plantations
- Turf and sports grounds
- Haul road and yard dust control
- Municipal spraying
- Sprayer OEMs
Benefits
Why choose our boom sprayer nozzle tips
Even overlap
Matched tips give consistent coverage across the boom.
Flat fan pattern
Tapered edges designed to overlap neighbours.
Accurate dose
Uniform flow means no over- or under-spraying.
Chemical resistant
Plastic tips will not corrode in agrochemicals.
Dust control
Also used to water roads and yards.
Affordable sets
Replace a full boom set at low cost.
Specifications
Technical details
| Spray pattern | Flat fan (hollow cone on request) |
|---|---|
| Material | Engineering plastic |
| Sprayer type | Tractor-mounted and towed boom sprayers |
| Size | Selected for your boom spacing, pressure and travel speed |
| Supply | Single tips or full boom sets |
Need a size or connection not listed? We make all types and sizes to order.
How to order
What we need for a quote
- Product and spray pattern
- Pipe size or thread connection
- Operating pressure
- Flow per nozzle or total flow
- Liquid and temperature
- Quantity and delivery city
FAQs
Boom Sprayer Nozzle Tips: frequently asked questions
How do I get even coverage across a boom?
Use matched tips of the same size, keep the boom at the right height for the spray angle and nozzle spacing, and replace all tips together when they wear.
How high should the boom be?
Boom height depends on spray angle and nozzle spacing. Higher booms increase drift. Tell us your nozzle spacing and spray angle and we will suggest a height.
Can boom sprayers be used for dust suppression?
Yes. Boom sprayers are widely used to wet haul roads, yards and tracks to keep dust down.
How often should boom tips be checked?
Calibrate at the start of each season and check flow from each nozzle regularly. Replace tips that deliver more than about 10% above a new tip.
Do you sell complete boom sets?
Yes. We supply single replacement tips or a full matched set for your boom.
Related products
You may also need
Not sure which nozzle fits your line?
Tell us the liquid, pressure and coverage you need. A nozzle engineer will recommend the right type, size and material.