Full cone · Adjustable ball
Adjustable Ball-Joint Full Cone Spray Nozzles
A solid, round spray you can point in any direction. The swivel ball lets you change the spray angle on site without moving the pipework.
- Full cone, evenly filled spray
- Swivel ball for precise aiming
- Plastic body for corrosive liquids
Adjustable ballOverview
A full cone you can aim
A full cone nozzle fills a circular area with spray, giving complete coverage of the target. Mounting it on a ball joint means you can adjust the direction after installation, which is useful in tanks, washers and process lines where the target is not straight below the pipe.
These nozzles are used wherever liquid must reach a surface evenly: cleaning, cooling, washing and dust suppression.
Typical applications
- Cleaning
- Cooling
- Washing
- Dust suppression
- Tank rinsing
- Process spraying
Benefits
Why choose our adjustable ball-joint full cone nozzles
Complete coverage
Evenly filled round spray over the whole target.
Aim on site
Change spray direction without changing pipework.
Corrosion-proof
Plastic body for chemical and saline liquids.
Effective cooling
Dense spray removes heat quickly from surfaces.
Dust control
Wets the material at transfer points and stockpiles.
Simple upkeep
Easy to unscrew, clean and refit.
Specifications
Technical details
| Material | Plastic (PP standard; other plastics on request) |
|---|---|
| Spray pattern | Full cone |
| Mounting | Adjustable ball joint for variable spray direction |
| Connection, flow and angle | Selected to suit your application; send pressure and flow |
| Supply | All sizes, manufactured in India |
Need a size or connection not listed? We make all types and sizes to order.
How to order
What we need for a quote
- Product and spray pattern
- Pipe size or thread connection
- Operating pressure
- Flow per nozzle or total flow
- Liquid and temperature
- Quantity and delivery city
FAQs
Adjustable Ball-Joint Full Cone Nozzles: frequently asked questions
What is a full cone spray nozzle?
A nozzle whose spray fills a solid circle (or square, depending on design) rather than a ring. It gives uniform coverage across the whole target area.
Why use a ball-joint nozzle?
The ball joint lets you set and later change the spray direction without moving the pipe, which saves time when targets are angled or change between batches.
Is this nozzle suitable for dust suppression?
Yes. Full cone sprays wet the material evenly at conveyor transfer points, hoppers and crushers. For very fine dust, a finer mist nozzle may be better; ask us.
What should I tell you to get the right size?
The operating pressure, required flow per nozzle, distance to the target, coverage width and the liquid being sprayed.
Do you have a clamp-on version?
Yes. Our clip-on spray nozzles combine a ball-joint full cone with a stainless steel pipe clamp.
Related products
You may also need
Clip-On Spray NozzleClamp straight onto 3/4″–2″ pipe. Full cone, hollow cone or flat fan.View details 
PP Spiral NozzleClog-resistant open-passage nozzles for scrubbers, cooling and gas washing.View details 
Flat Fan Clip-On NozzleEven flat-fan coverage for washing, degreasing and pretreatment lines.View details Not sure which nozzle fits your line?
Tell us the liquid, pressure and coverage you need. A nozzle engineer will recommend the right type, size and material.